Q: Does D3 Customs sell parts online for road homologated conversions? The installation is the same as on our original HD, easy and fast, remove the 10mm and 13mm nuts from the master cylinder behind the brake pedal, put on the Spring Brake Thingy and then put the nuts back on. It is so easy and fast, takes no more than 2-3 minutes. Now, you can`t even think about leaving your UTV unattended. Its enormous versatility makes it a popular target for thieves. If you want to reduce the risk of Polaris theft, we recommend purchasing our Polaris General Lockable Parking Brake. Immobility is one of the most important ways to prevent occasional theft. If your UTV has punctured brake discs, you should definitely look into this product. All you have to do is insert the padlock through pre-machined holes that serve as a deterrent against theft. To work, you need to press the brake pedal with your right foot and slide the lever on the brake pedal alarm with your left foot, which causes the SBT to turn on all 4 brakes. Once you`ve done that, add your own padlock with a 1/4 to 5/16 thick shaft for added security.
This padlock is so easy to install that even a layman can do it. So say goodbye to flying with our advanced technology, but don`t be so arrogant and leave your UTV outside. Instead, park it in your garage or shed and, if that`s not possible, keep your UTV in your garden, all covered and protected from prying eyes. This brake allows you to insert a padlock through pre-machined holes to give you the extra option to use as an anti-theft deterrent. Q: Do you offer a Michigan DOT approved parking brake? To work, press the brake pedal with your right foot, slide the lever with your left foot on the brake pedal alarm and the SBT will turn on all 4 brakes. Once you`re adjusted, add your own padlock (1/4″ to 5/16 shaft) for added security. To release it, simply unlock the padlock, remove it and press the brake pedal. • Parking brake (required on ORV/UTV for on-road use) If you live in Michigan, a few simple changes and a simple state inspection are all you need to get your SxS road approval! Our experienced team can make you Michigan TR-54 compliant in no time! Parking brake for your Polaris GENERAL- Suitable for all GENERAL models.
This brake allows you to insert a padlock through pre-machined holes to give you the extra option to use as an anti-theft deterrent. Installation is quick and easy. Remove the 10 mm and 13 mm nuts on the master cylinder behind the brake pedal. Put on the spring brake. Then put the nuts back. Yes, it`s as simple as that, takes no more than 2-3 minutes. To work, press the brake pedal with your right foot, slide the lever with your left foot on the brake pedal alarm and the SBT will turn on all 4 brakes. Once you`re adjusted, add your own padlock (1/4″ to 5/16 shaft) for added security. To release it, simply unlock the padlock, remove it and press the brake pedal. ALWAYS USE PARK WITH THE THINGY SPRING BRAKE AND MAKE SURE YOUR BRAKES ARE IN GOOD CONDITION.
The Spring Brake Thingy is designed to protect your expensive transmission from damage when you park on a hill and have that «BANG» when trying to shift into high gear. It is not designed to be used as a single braking system when parking on slopes, always be very careful and use large blocks or stones behind your tires to avoid driving. Your brakes must be in good condition, this product will not compensate for brakes that are not working properly. Do not stand in front of or behind the vehicle when you are on a slope, always keep the front and rear areas of the vehicle clear, even when the parking brake is applied. There is no complete test system on every vehicle that guarantees that a vehicle will drive on a slope. •Safety glass (no plexiglass, size sufficient to protect driver and passengers, no cracks, no obstacles, non-transparent material prohibited)• Driver`s side exterior mirrors (adjustable) Q: Can D3 Customs provide all the services required by Michigan Form TR-54? Found a lower price? Let us know. While we can`t meet all prices listed, we use your feedback to ensure our prices remain competitive. A: Most models are newer than the year 2000. Please use the custom quote form for more information! • Horn• Bright light display• Wipers• Windshield washer• Brakes (sufficient to stop and hold the vehicle) Q: Does the D3 work side-by-side on all makes and models? A: Not at the moment! But we intend to offer this as soon as possible in the future! Our Polaris experts are ready to answer your questions or delve deeper into the features and benefits of this product, help you explore similar or complementary products, confirm vehicle equipment, and more. A: Yes, as long as you bring your side by side to our store in Michigan. Please call ahead for an appointment • Exhaust (good working order, no excessive noise.
Must include exhaust pipe and resonator if the original design included exhaust pipe and resonator) • Bumper (required for passenger cars, 14 to 22 inches above the ground, except 4WD) Customer feedback, including star ratings of products, helps customers learn more about the product and decide if it`s the right product for them.